NuPET PET/MRI 嵌入式聯用掃描儀

NuPET™ PET/MRI 嵌入式聯用掃描儀

產品概述:

用于PET/MR成像的革命性的磁共振兼容PET掃描儀，允許同時測量體內的分子和功能過程，Cubresa的 NuPET™是一個革命性的 PET掃描儀，可插入到現有的MRI中，創建一個功能強大且靈活的混合臨床前體內成像平臺 ,將PET的分子靈敏度與MRI的優異解剖，結構和功能信息相結合。使用同步PET/MRI成像的研究人員可以同時測量多種生理過程，同時具有出色的組織對比度，定量準確度和研究通量。連續的PET/MRI掃描可以在不同的時間獲取數據，當動物生理學在幾分鐘內發生變化時，難以分析重要的功能關系。通過NuPET的同步掃描，PET和MRI協同工作，捕捉以前無法達到的時間同步和高度互補的信息 - 這樣您就可以開辟新的發現之路。

NuPET™ 技術特點：

√ 在你的MRI中同時進行全身小鼠和鼠腦成像

√ 支持廣泛的MRI系統，包括高場模型，以及小動物梯度的使用

√ 可用的獨立PET操作系統

√ 全自動的 PET/MRI 圖像配準

√ 行業內最小尺寸

特別精確的PET / MR圖像配準和配對的PET和MRI數據點引發了諸如基于MR的運動校正和部分容積校正（PVC）等增加PET定量準確性的進展。利用MRI的高軟組織對比度，可以使用解剖數據準確繪制VOI，而無需猜測。較短的麻醉持續時間有助于減少動物的壓力，并降低誘發可能影響研究質量的生理變化的風險。

技術原理：

對于生物的安裝，Cubresa做了一個更大的套筒，適合于PET的插入。這個套筒有一個可充氣的橡皮管，可以被抽上來。這個大套筒適合于核磁共振孔徑的2或3毫米之內，然后使橡膠套筒被泵起以保持PET插入到位和減輕振動效果。該系統的工作流程包括用于從前端出口的核磁共振線圈的調諧棒。這使得動物，動物的處理，動物的定位和調優都可以從MRI的前部，節省時間和麻煩。對于這種MRI機械的安排，一個支持和鎖條被設計成允許適合于一些定制的硬件孔槽。

應用領域：

神經科學—受體活性，功能藥理學

腫瘤學—腫瘤特征及治療反應評估

心臟病學—多參數功能和代謝評估

探針發展—“聰明”造影劑􀀁

應用案例

加拿大倫敦勞森研究

Cubresa在加拿大安大略省倫敦勞森研究所安裝了NuPET系統用于臨床前研究。該系統用于3T西門子生物圖。Cubresa提供機械附件，西門子床可與PET插入一起使用。這個系統的工作流程很重要。?？空疚挥谕獾姆块g由于病人安全問題,因此電纜來自濾板的板,通過核磁共振成像系統,并延伸到前面的MRI寵物準備插入和動物運動系統,如上圖所示。

亞利桑那大學

亞利桑那大學有一個7T布魯克爾系統和20厘米的孔。這些系統通常使用BGS- 12A漸變，內徑為116毫米。Cubresa NuPET設計用于MRI，因此不需要外部套管。這個系統的工作流程從后面插入一個NuPET，從前面插入一個床系統。

NuPET™ 技術參數：

文獻列表：

[1] Dr. Gregory Stortz (2016), “Development of a small animal MR compatible PET insert” (Doctoral Thesis). Department of Physics and Astronomy, University of British Columbia.

[2] Graham Schellenberg (2015), “An algorithm for automatic crystal identification in pixelated scintillation detectors using thin plate splines and Gaussian mixture models” (Master's Thesis). Department of Physics and Astronomy, University of Manitoba.

[3] Ehsan Shams (2014), “A slow control system with gain stabilization for a small animal MR –compatible PET insert” (Master's Thesis). Graduate Program in Biomedical Engineering, University of Manitoba.

[4] Chen-Yi Liu (2013), “Characterization of silicon photomultiplier readout designs for us in positron emission tomography systems” (Master's Thesis). Department of Physics & Astronomy, University of Manitoba.

[5] Leonid Lamwertz (2013), “Data acquisition and real-time signal processing in positron emission tomography” (Master's Thesis). Department of Electrical & Computer Engineering, University of Manitoba.

[6] Dr. Fazal ur-Rehman (2012), “Design and development of detector modules for a highly compact and portable preclinical PET system”, (DoctoralThesis). Department of Physics & Astronomy, University of Manitoba.

[7] C. J. Thompson et al., “Comparison of single and dual layer scintillator blocks for preclinical MRI-PET” IEEE Transactions on Nuclear Science, 2012

[8] X. Zhang et al., “Development and evaluation of a LOR-based image reconstruction with 3D system response modeling for a PET insert with dual-layer offset crystal design”, Physics in Medicine and Biology, 2013 Dec 7;58(23):8379-99.

[9] "Measurement of energy and timing resolution of very highly pixellated LYSO crystal blocks with multiplexed SiPMreadout for use in a small animal PET/MR insert", Christopher J. Thompson, Andrew L Goertzen, Poitr Kozlowski, Fabrice Retiere, Greg Stortz, Vesna Sossi, Xuezhu Zhang, Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC) 2013 IEEE, pp. 1-5, 2013.

[10] “Design and Performance of a resistor multiplexing readout circuit for a SiPMdetector array” Andrew L Goertzen, Xuezhu Zhang, Megan M McClarty, Eric J Berg, Chen-Yi Liu, Piotr Kozlowski, Fabrice Retière, Lawrence Ryner, Vesna Sossi, Greg Stortz, Christopher J Thompson, 2013/6, J. IEEE Trans. Nuc. Sci

[11] G. Stortz, M. D. Walker, C. J. Thompson, A. L. Goertzen, F. Retière, X. Zhang, J. D. Thiessen, P. Kozlowski, and V. Sossi, "Characterization of a New MR Compatible Small Animal PET Scanner Using Monte-Carlo Simulations," IEEE Trans. Nucl. Sci., vol. 60, no. 3, pp. 1637-1644, Jun. 2013.

[12] “A PET detector interface board and slow control system based on the Raspberry Pi®”, E. Shams et al, Nuc. Sci Symposium and Med Imaging Conference, 2013 IEEE

[13] Thiessen, J.D., Jackson, C., O’Neill, K., Bishop, D., Kozlowski, P., Retière, F., Sossi, V., Stortz, G., Thompson, C.J., & A.L. Goertzen. Performance Evaluation of SensL SiPMArrays for High-Resolution PET. 2013 IEEE Nuclear Science Symposium and Medical Imaging Conference Seoul, Korea, October

27, 2013.

[14] Zhang, X., Thompson, C.J., Thiessen, J.D., & A.L. Goertzen. “Simulations Studies of a Phoswich PET Detector Design with a Two-Fold Improvement in Spatial Sampling” 2013 IEEE Nuclear Science Symposium and Medical Imaging Conference Seoul, Korea, October 27, 2013.

[15] Thiessen, J.D., Berg, E., Liu, C.-Y., Bishop, D., Kozlowski, P., Retière, F., Sossi, V., Stortz, G., Thompson, C.J., Zhang, X., & A.L. Goertzen. MRCompatibility of a SiPM-Based PET Detector Module Using HDMI for Analog Readout and Power Supply. ISMRM 21st Annual Meeting and Exhibition

部分用戶名單: