3500/65-01-00-R0 3500/65監視器提供16通道溫度監測

3500/65監視器提供16通道溫度監測，并接受電阻溫度檢測器(RTD)和隔離熱電偶(TC)溫度輸入。監視器調節這些輸入，并將它們與用戶可編程報警設定值進行比較。
監視器是使用3500機架組態軟件編程的。可以配置16通道
溫度監視器接受隔離熱電偶，3線RTD, 4線RTD，或TC和RTD輸入的組合。在三模冗余(TMR)配置中，必須以3個相鄰監視器為一組安裝溫度監視器。在此配置中，監視器使用2種類型的投票來確保準確的操作并避免單點故障。

3500/65監視器提供16通道溫度監測，并接受電阻溫度檢測器(RTD)和隔離熱電偶(TC)溫度輸入。監視器調節這些輸入，并將它們與用戶可編程報警設定值進行比較。
監視器是使用3500機架組態軟件編程的。您可以配置16通道溫度監視器，以接受隔離熱電偶，3線RTD, 4線RTD，或TC和RTD輸入的組合。
在三模冗余(TMR)配置中，必須以3個相鄰監視器為一組安裝溫度監視器。在此配置中，監視器使用2種類型的投票來確保準確的操作并避免單點故障

The 3500/65 monitor provides 16 channels of temperature monitoring and accepts both resistance temperature detector (RTD) and isolated tip thermocouple (TC) temperature inputs. The monitor conditions these inputs and compares them against user-programmable alarm setpoints.
The monitor is programmed using the 3500 Rack Configuration Software. You can configure the 16-Channel
Temperature Monitor to accept isolated tip thermocouples, 3-wire RTD, 4-wire RTD, or a combination of TC and RTD inputs. In Triple Modular Redundant (TMR) configurations, you must install temperature monitors in groups of 3 adjacent monitors. In this configuration the monitor uses 2 types of voting to ensure accurate operation and to avoid singlepoint failures.

The 3500/65 monitor provides 16 channels of temperature monitoring and accepts both resistance temperature detector (RTD) and isolated tip thermocouple (TC) temperature inputs. The monitor conditions these inputs and compares them against user-programmable alarm setpoints.
The monitor is programmed using the 3500 Rack Configuration Software. You can configure the 16-Channel Temperature Monitor to accept isolated tip thermocouples, 3-wire RTD, 4-wire RTD, or a combination of TC and RTD inputs.
In Triple Modular Redundant (TMR) configurations, you must install temperature monitors in groups of 3 adjacent monitors. In this configuration the monitor uses 2 types of voting to ensure accurate operation and to avoid single-point failures